Want to learn Quilt-As-You-Go but don’t know where to start? This big stripes panel will help you learn the technique.
I’ve seen some great things made from my Bloomin’ Quilt-As-You-Go Pillow tutorial, but I’ve also heard that it can be a little…challenging. Especially if you’ve never done any quilt-as-you-go before.
So I created this beginner quilt-as-you-go tutorial for a “big stripes” panel. It’s a simple introduction to quilt-as-you-go, without, well, melting your brain. It will help you understand the basic idea behind quilt-as-you-go, and hopefully prepare you for further ventures into the style.
If this is your first time with quilt-as-you-go, the basic difference between this and regular quilting is that instead of piecing your top and then quilting it to your batting, you piece it and quilt it as you go (thus the name!).
This tutorial makes a 16.5″ x 16.5″ big stripes panel, which can be turned into a pillow or mini quilt or bag. Quilt-as-you-go like this is not great for quilts, because the back of the panel is oogly. If someone can figure out how to make them into a quilt, I’d love to see it!
Supplies:
Two strips of Fabric A: 18″ x 4.5″
Two strips of Fabric B: 18″ x 4.5″
One square of batting: 18″ x 18″
One square of backing fabric (I use inexpensive white cotton from JoAnn): 18″ x 18″
Basting spray (optional, but recommended)
All the usual sewing tools (sewing machine, rotary cutter, snips, etc.)
Instructions:
Cut out your fabric to the sizes listed in the supplies list. You’ll notice the fabric is about an inch and a half wider than your final panel size. After making many of these pillows, I’ve found the fabric shifts quite a bit, and it’s easiest just to make it a bit larger and trim down to size.
Use the basting spray to hold together the backing fabric and the batting. I find that this step causes the fabric to shift less during sewing.
Lay your first Fabric A strip of fabric on the batting, right-side up and aligned with the left edge of your pillow. You can spray baste if you’d like.
Set up your machine to quilt. You can use a walking foot, but I find I like my regular foot better. Lengthen your stitch and use a high-quality thread.
Stitch the fabric to the batting, using straight lines. To save thread, when I come to the end of the fabric, I turn the panel, stitch three stitches down, and then stitch back the other way across the fabric. You can see what I mean in this video (video will be downloaded to your Downloads folder and which is for my Bloomin’ panel, but you should get the general idea). My lines end up about half an inch apart.
Once the first strip is quilted to your batting, place a Fabric B strip face-down on top of the already quilted Fabric A. They two pieces should be right-sides together.
Stitch along the edge of the two fabrics using a 1/8″ – 1/4″ seam. You should end up with this:
Press Fabric B away from Fabric A.
Quilt Fabric B to your batting the same way you quilted Fabric A. It should look like this:
Repeat these steps with the second Fabric A and then second Fabric B pieces.
Now all you have to do is square up your block. I use the center seam as a guide, making it perpendicular and trimming off the edges so the remaining block is 16.5 wide.
I then trim off the top and the bottom so that it’s 16.5″ square — when it’s made into a pillow, it will be 16″ square.
Tada! You can quilt-as-you-go!
Check out this blog for a Blooming Quilt Pattern Tutorial!
More Quilt As You Go Posts
- Learn Quilt-As-You-Go: Easy Big Stripes Panel
- Bloomin’ Quilt-As-You-Go Tutorial
- Seaside Boardwalk Quilt-As-You-Go Tutorial
- Scattered Geese Quilt-As-You-Go Tutorial
- Go Fly a Kite Quilt-As-You-Go Tutorial
- Step It Up Quilt-As-You-Go Tutorial
- Bear Mountain Quilt-As-You-Go Tutorial
- Scottish Thistle QAYG Block
- North West Quilt-As-You-Go Block Tutorial
LEARN QUILT-AS-YOU-GO: EASY BIG STRIPES PANEL
Equipment
- Basting spray optional, but recommended
Supplies
- 2 strips Fabric A 18" x 4.5"
- 2 strips Fabric B 18" x 4.5"
- 1 square batting 18" x 18"
- 1 square backing fabric 18" x 18"
- Coordinating thread
Instructions
- Cut out your fabric to the sizes listed in the supplies list. You'll notice the fabric is about an inch and a half wider than your final panel size. After making many of these pillows, I've found the fabric shifts quite a bit, and it's easiest just to make it a bit larger and trim down to size.Use the basting spray to hold together the backing fabric and the batting. This step causes the fabric to shift less during sewing.Lay your first Fabric A strip of fabric on the batting, right-side up and aligned with the left edge of your pillow. You can spray baste if you'd like.
- Set up your machine to quilt. You can use a walking foot, but like the regular foot better. Lengthen your stitch and use a high-quality thread.Stitch the fabric to the batting, using straight lines. To save thread, when you come to the end of the fabric, turn the panel, stitch three stitches down, and then stitch back the other way across the fabric. You can see how to do that in this video (video will be downloaded to your Downloads folder and which is for the Bloomin' panel project, but you should get the general idea). The lines end up about half an inch apart.
- Once the first strip is quilted to your batting, place a Fabric B strip face-down on top of the already quilted Fabric A. They two pieces should be right-sides together.
- Stitch along the edge of the two fabrics using a 1/8" – 1/4" seam. You should end up with this:
- Press Fabric B away from Fabric A.
- Quilt Fabric B to your batting the same way you quilted Fabric A. It should look like this:
- Repeat these steps with the second Fabric A and then second Fabric B pieces
- Now all you have to do is square up your block. I use the center seam as a guide, making it perpendicular and trimming off the edges so the remaining block is 16.5 wide.
- Then trim off the top and the bottom so that it's 16.5" square — when it's made into a pillow, it will be 16" square.
- Tada! You can quilt-as-you-go!
Comments & Reviews
Paula says
It’s actually really easy to use this method to create full size quilts. One of the easiest ways is to create QAYG squares, rectangles or long strips without the backing fabric and then sew these together to form the full quilt. As long as your batting isn’t really thick your seams should iron out flat fairly easily. Then baste some backing fabric onto the whole quilt, you can spray baste or pin baste this in place, and secure it in place be either stitching in the ditch between your joined blocks or by simply tying the quilt. Trim, bind and you’re done. A second method involves joining the fully quilted blocks with sashing. For the latter method you quilt the blocks with the backing fabric in place. There are plenty of tutorials for both methods around.
Margaret says
I am seeing quilts I can’t wait to attempt
Thanks for your directions that will open multi doors for me.