If you buy anything through the affiliate links in this post, I earn a small commission of the sale—with no price difference to you! This helps keep the blog up and running so we can make even more stuff!
It’s time for February’s quilt-as-you-go (QAYG) block! I want to do a block a month, and so far I’m two for two. Check out January’s Seaside Boardwalk block. We’ll see if I can keep it up when the twins get here!
READ ME: Before I get too far into this, I often get asked, “how do I connect the quilt blocks?” That’s kind of a problem. The back of QAYG is ugly (I mean ugly). I haven’t found a pleasing way to connect the blocks while adding a second layer of backing fabric. So I usually use the technique to make pillows and bags — things with a lining. But there are several tutorials out there for connecting QAYG blocks, so feel free to try one of those. I can’t personally recommend any of them, since I haven’t tried them.
If you aren’t familiar with QAYG, it’s a foundation piecing technique is often used to make a log cabin block (here’s a great tutorial from Oh Fransson!). Today, I’m taking that simple log cabin block and embellishing it a bit, with a few faux flying geese (thus the block name — Scattered Geese). It’s a fairly easy tutorial, but if you’re completely unfamiliar with QAYG, I created a VERY easy Big Stripes block that can help teach you the method.
- 13″ square of batting
- 13″ square of backing fabric
- Sewing machine
- Scissors or Rotary Cutter
- Cutting Mat
Start by laying out your fabrics. You will need a selection of fabrics for the main log cabin block, and a different selection for accent “geese.” I’ve used my favorite color technique — splitting the block into two gradients, in this case one of gray and one of purple. As always, you’ll notice in my final block that I didn’t end up using all the fabrics I chose — I just picked what felt right as I went along. The gradients I choose are just a guide for the final block.
You are also going to need a 13″ square of batting, and a 13″ square of backing fabric. I use cheap white fabric from JoAnn for the back ($1.99 a yard). The final block size will be 12.5″ square, but I like a little extra for trimming. Lay out the backing fabric with your batting on top.
One of the great things about these blocks is that you can modify the pieces to fit your vision. All of my cut sizes are just suggestions. Go wild!
Start by quilting a 1.5″ square of your accent color fabric directly to the batting/backing layers. I like to use diagonal lines here because the other accent pieces will also have diagonal lines. I also lengthen my stitch a little — my machine doesn’t have numbers, but it’s longer than a standard stitch, but not quite as long as a basting stitch.
You’re then going to build off that center block like you would any other log cabin block, with two pieces the same width above and below that center block, and two pieces running down each side. I used 1.5″ strips here as well. You can lay out your fabric to get an idea of what it will look like.
Add the top piece of your log cabin block, right-side down on top of the first piece. You are going to stitch very close along the edge of the two fabrics, 1/8″ away from the edge. If you look closely at the below photo, you can see my line of white stitching at the top (sorry, it’s a bit hard to see).
Open that piece and press in the opposite direction. Quilt to the batting and backing fabric, using straight lines (one of these days I’ll learn not to start with the lightest fabric to demonstrate this).
Use this technique to quilt the piece below the center square, and the sides.
To create the first of your geese, cut an accent color strip 4″ wide and 2.25″ tall. Place your accent color strip at a 45 degree angle across the edges of the two log cabin block strips. I place it right-side up just to see where I’m going.
Place the accent color strip face down and stitch along the long edge. You’ll want to position it so that your seam hits right at the top right corner of the first accent color square. Stitch along the long edge of the triangle. Open and press, and quilt to the backing.
Add another square of log cabin pieces around the original square you’ve created. You’ll see that the triangle shape is made by the overlapping strips.
NOTE: I use pieces of white fabric to help keep the bottom color from bleeding through the lighter gray fabric. You can see this and four other tricks on my post Five Tips for Better QAYG.
Using the same technique as before, add your next accent color.
And then your log cabin square strips.
Continue on in this manner until you’ve reached the edge of your block. Add that last piece of accent color in the corner, and then square up your block so that it’s 12.5″ x 12.5″
And that’s all! This is the perfect project if you’re getting a little tired of a standard quilt-as-you-go log cabin block, but don’t want to stray too far out of familiar territory.
As always, if you have any questions about this (or any of my tutorials), feel free to ask in the comments!
Here are links to my other QAYG blocks, all in one place!
TODAY’S TOP TEN POSTS
- How to Make Tissue Paper Flowers Four Ways 1,232 views
- 10+ DIY Dreamcatcher Tutorials 368 views
- Easy-Sew Two-Hand Casserole Pot Holder 198 views
- 5 Mistakes to Avoid While Painting Cabinets 189 views
- Shark Week: Corner Shark Bookmark 181 views
- The Best Meat Sauce Ever 164 views
- 12 Ways to Get the Fixer Upper Look at World Market 148 views
- How to Use the Cricut Tool Set 129 views
- Scottish Thistle QAYG Block 121 views
- Easy-Sew Curtains 114 views