Organize your pantry with these vinyl pantry labels! Download the free SVG files and cut them out on your Cricut Explore or other electronic cutting machine.
PIN THESE PANTRY LABELS TO YOUR ORGANIZING PINTEREST BOARD!
PINTEREST HAS MORE CUT FILES FROM HEY, LET’S MAKE STUFF!
I originally posted these labels last year, but in the meantime, many readers have asked for additional labels. So I’ve updated the files with all sorts of new labels. I originally had 56 labels, now there are 90! Got amaranth? I’ve got your label! You’ll be able to organize everything in your pantry. You’ll also want to check out my Spice Jar Label set!
I’ve reworked the files into 10 separate SVG cut files, to make cutting them on a Cricut or other cutting machine easier. Here’s the original tutorial on how to make them!
* * *
Our house doesn’t have a pantry. It does have a hall closet that we sort of use as a pantry, but it’s far from the kitchen and half the time I forget what’s in there (or that it even exists at all). So I decided to create a pantry using the beautiful Campaign Shelf I got at World Market and a bunch of glass jars. I love the way my pantry staples look on the shelf, and it freed up the closet to be used for small appliances. Which were in the guest bedroom.
This whole house needs a storage makeover, I tell you.
I haven’t finished the entire shelf yet — I want to find a large basket to put at the bottom for tupperware (I figure the boys can get into it and play with everything), as well as some other smaller baskets or boxes for storing packaged food. But the top two shelves are pretty much done!
Once I had everything in jars, I realized I need pantry labels. How will I remember that the darker powder is actually almond flour? So I set out to make a set I could cut on my Cricut Explore (or other cutting machine). I also wanted it to be useful for you all, so I came up with ninety labels that you might need.
Note #1: These are the directions to use the files in the Cricut Design Space. If you have another cutting machine, the instructions should be similar but you’ll have to modify as necessary.
Note #2: The original files had all the labels in one sheet. But readers told me this was cumbersome, so I made 10 files, each with nine labels. The directions are the same as below, but the screenshots will show all the labels, not the smaller nine-label files.
Download the label files I created. There are nine sheets, to make cutting them easier. Import the files you want into the Cricut Design Space using the “Upload File > Vector File” option.
Your labels will appear in the Design Space (see note #2 above). Using the “eye” icons on the right, hide the labels you do not need.
Once you have only the labels you need visible, click “Ungroup” in the lower right corner.
Click on the “Edit” tab to change the size of each label. Because my jars were a variety of sizes, I made the labels between 2.5″ and 4″.
Cut the files on your Cricut, making sure to select “Vinyl” as your material type.
Once the files are cut, weed out everything but the labels — the letters and the white circle. Leave the vinyl attached to the cutting mat to make it easier. This is a little tedious — I find the Cricut Weeding Tool helps a lot. Make sure not to lose the little pieces inside letters like A, P, and D.
Cut a piece of transfer tape the size of your sheet of labels. Peel back the backing paper and place it, sticky side down, on the top of the labels. Press down thoroughly.
Peel the vinyl sheet off the cutting mat. Then cut around each individual label so you can apply them to the jars.
Peel off the vinyl backing, exposing the adhesive side of the vinyl. Line up your label so it’s not crooked, and press hard. Try to get any bubbles out.
Peel off the transfer tape. Push out any remaining bubbles.
And that’s all! I love how the labeled jars look on my shelf — they are both practical and beautiful!
I found that my labels worked the best on flat surfaces — the large glass jars and the mason jars. The clamp-lid jars have a bit of a curve at the top and the vinyl puckered a bit, like on the quinoa jar below. I’m going to replace those few jars with flatter jars — it’ll be a cleaner look.
But overall, I am so happy with how this project turned out!
How do you store pantry staples in your house?
You are also going to want to make my matching Spice Jar Labels set!
OTHER CRICUT PROJECTS YOU MIGHT LIKE:
TODAY’S TOP TEN POSTS
- How to Make Tissue Paper Flowers Four Ways 1,485 views
- 5 Mistakes to Avoid While Painting Cabinets 597 views
- 10+ DIY Dreamcatcher Tutorials 455 views
- 20+ Stunning Paper Flower Tutorials 368 views
- What is the Cricut Explore Machine and What Does it Do? 207 views
- Easy-Sew Curtains 190 views
- Tri-Color Tissue Paper Flowers 177 views
- DIY Outdoor Wedding Games 159 views
- How to Make Cricut 3D Flowers 150 views
- Vinyl Pantry Labels – Free SVG Download 96 views