PLEASE READ ENTIRE DESCRIPTION
***PLEASE BE AWARE- this is a sublimation transfer ONLY. This transfer is to be used with your heat press or mug press for applying designs to your shirts, mugs, can coolers, or any sublimation blank.***
-You MUST have a heat press(or mug press) to use these, a regular iron will not work.
-FOR DESIGNS BEING PUT ON SHIRTS/FABRIC- Transfer must be used on a shirt that is at least 65% polyester, but a 100% is preferable. Some vendors recommend 50% polyester or more, it will work, but only 50% of the design will show. It will be very very faded!
I recommend at least 65% polyester, 100% is always best!.
-Shirts/fabric needs be light in color white or heather gray are best.
-There is no white ink in sublimation, so any white in the design will take on the look of the garment or sublimation blank. If it is used on a dark colored fabric it will not show up well and if it is used on black/dark colored will not show up at all.
-Sublimation involves the dye turning into a gas a being infused into the item. There is no feel to the design after applied, it will feel exactly like the original garment.
You will be sent your print on high quality professional sublimation paper. All of our sublimation printing is done with top of the line sublimation printers and sublimation inks.
Sizing should be based on your personal preference of how big you want the design on the shirt. If you are unsure you need to measure before ordering!
Ours sizes are done in general popular sizes. Our sizes are measured based on the longest side of the design. Need a exact size? No problem, just let me know.
The mug and can cooler option will come with 2 prints, one for each side. All other options come with 1 print. 10 packs include 10 prints.
*****All transfers are non refundable. No returns are accepted. You are agreeing when purchasing that you will be using the correct equipment, have fully read the instructions, and you understand the application errors are the responsibility of the buyer.*****
**Learning to use sublimation can have a learning curve. I recommend reading a lot of "how to's" and watch a lot of utube video's before purchasing. We can not be held responsible for user error.**
Your print will not include any watermarks.
Many designs can be sublimated onto other items (Sublimation blanks--mugs, garden flags, etc. please see a sublimation blank vendor site for other options) ONLY SHIRTS WITH POLYESTER AND SUBLIMATION BLANKS WILL WORK!
Instructions for shirts/fabric:
–Turn your heat press on to 385-400 degrees F
– Set it to 45-55 seconds
– medium pressure(I like light-medium pressure)
- Pre press your garment for 3-5 seconds to remove any moisture
-Place a sheet of blow out paper inside the garment, directly under were you are putting the design(butcher paper or copy paper works)
-Place your sublimation print face down on the garment
-Cover with more blow out paper
-Press
-Remove paper immediately after pressing
*PRO TIP- To help avoid press lines in your garment- rip paper by hand all the way around the design prior to pressing. Also lighting up the pressure will help avoid press lines.*
**To keep buyers cost down, printed instructions will not be sent with these unless requested. If you need printed directions, please let me know before we ship your order.
If you need instructions for mugs or other blanks, please consult the supplier of your sublimation blanks.**
*Times, temperature, and pressure may vary slightly with different heat presses*
Please visit our sister shop at www.etsy.com/shop/ACellarStudio for finished products such as sublimated shirts and mugs or vinyl design. We can put any of our sublimation designs on a shirt or a mug for you.