A DIY dream catcher adds softness and whimsy to any home decor — and there’s no weaving involved in this version!
I am an ambassador for Therm O Web, who kindly sponsored this post. Thank you for supporting the brands that support Hey, Let’s Make Stuff!
I’ve been vaguely obsessed with all the beautiful DIY dream catchers I’ve been seeing around. So I decided to make one of my own. My house tends toward a more simple, geometric style and I thought I could add a little softness and whimsy with a DIY dream catcher, made with a simple embroidery hoop, woodcut leaf, and a bunch of ribbon and trim — plus a little gold Deco Foil!
DIY Dream Catcher Supplies
- Embroidery hoop
- Wood leaf (or something similar)
- Various ribbons, trim, rick-rack, lace, etc.
- Gold Deco Foil
- Deco Foil Liquid Adhesive
- Deco Foil Spray Adhesive
- Super glue
DIY Dream Catcher Directions
I don’t have a lot of how-to pictures for this project — it was one I just began one evening without thinking much about it, but I love it so much that I had to share. I also wanted to make sure I shared was the way I used Therm O Web’s Deco Foil in three ways on this project—on the embroidery hoop, on the wood leaf, and on the feathers.
For the embroidery hoop and the leaf, I just used my finger to roughly brush on some of the Deco Foil liquid adhesive, and waited about 45 minutes. Then I pressed the foil (gold side up) over the hoop and leaf. When I lifted it up, the foil stuck! I love how it looks.
For the feathers, I used the spray adhesive and my iron. I covered most of the feather with a piece of scrap paper and sprayed just the ends. I let it dry for about a minute, put the gold foil over the feather, a piece of vellum, and then ironed it on low. The heat activated the spray adhesive and the gold foil stuck to the feathers. So cute!
Once I had everything foiled, I made my dream catcher. I used twine to suspend the leaf in the embroidery hoop. This would work with a metal ring or other shape as well. I just happened to have some wood leaves — I honestly can’t even remember where they came from!
Then I just looped some of my trim to the bottom of the hoop, and used super glue to adhere some others. I glued the feathers to some twine and adhered that as well. It was so easy!
TODAY’S TOP TEN POSTS